zoetis Simcro Premium Injector Draw Off Syringe

To attach the bottle:

1. Use sterile luer-lock needle to pre-puncture center of rubber stopper on bottle prior to attachment. Ensure needle sheath is replaced when done.
2. Place tip of draw-off spike at center of stopper.
3. Tilt draw-off cap to one side to engage rib on inside of cap with side of metal closure.
4. Hold firmly and push (with thumb using a lever action) draw-off cap so the spike penetrates stopper and cap snaps completely over metal closure.
5. Push draw-off tube fully onto inlet barbs of injector.

The draw-off cap is designed for use with both collapsible and non-collapsible vaccine packs and will, therefore, let air into the bottle during use.
To fit needle:

1. For safety, do not remove needle sheath until ready to prime.
2. Screw the rear flange of the needle clockwise into the metal luer lock until tight. Do not over-tighten.

To remove needle, unscrew the needle in a counter-clockwise direction.