Wellmark International Ltd. starbar Fly Terminator PRO

Instructions:

1. Shake attractant well (attractants tend to settle to the bottom during storage).
2. Pour 30 ml (2 tablespoons or 1 oz) of attractant concentrate gel into Fly Terminator jug.
3. Fill jug 1/3 to 1/2 full of water.
4. Agitate lightly to disperse attractant.
5. Screw top assembly onto the jug.
6. Place trap outside, on the ground, in a sunlit area of high fly concentration. Active flies and odors will not be a problem.

Maintenance:

1. Contents of the trap should be agitated twice weekly (minimum) to thoroughly wet all trapped flies.
2. Add water as necessary to keep the fluid near the fill level or within 72 inches below the surface of trapped flies. Do not allow trap to dry out.
3. Without adequate agitation, fly larvae (maggots) may appear as a layer of dry flies in the trap. If this occurs, add one teaspoon of liquid dish soap and enough water to completely cover all flies (about 1/2 to 2/3 full), agitate, let stand for 24 hours and lower fluid level back to the fill level.
4. When the jug is about 2/3 full of dead flies, empty; then clean the trap and re-bait with fresh attractant.