Shoof International Ltd. Tailwell 2 Replacement Blade Only

First, ensure the drill is running at full speed. Locate the nub of the cow’s tail and insert into the Tailwell cutters. Grab the nub of the tail and push the Tailwell up the length of the tail.

Fitting the Tailwell to a cordless drill:

1. Place the Tailwell drive shaft into the open chuck and pull the flexible sleeve backwards, firmly onto the drill.
2. Tighten the drill chuck, making sure the chuck claws are aligned with the flats of the Tailwell driveshaft.
3. Pull the flexible sleeve back on the drill once more to ensure that it’s tight.
4. Pull the stretchy cord over the back of the drill. This is for safety against the Tailwell dropping off the drill accidentally.
5. Oil the cutters with the oil supplied in the kit.
6. The Tailwell is now ready to trim.