A 2-part adhesive system, supplied in a convenient cartridge system. No hand-mixing required. Sets quickly, in 30 to 40 seconds and has a curing time of 2 to 4 minutes. Glue mixes in the tips as it comes out of dual-chamber cartridge.
Labeled for: beef and dairy cattle
Species: cattle
A well-prepared claw contributes to a good and long lasting adhesion. Claw needs to be clean, dry and also roughened to increase strength of adhesive.
Open the top cover of cartridge. Put the cartridge in a dispensing gun and apply slight force to dispense small amount of adhesive. Make sure both resin and hardener are dispensing in equal amount. Install the mixing tip on the nose of the cartridge and start dispensing the material.
Apply a bead of adhesive on the block to maintain 1.5 to 2.0 mm thickness. Place block immediately on the claw and press. After 2 to 4 minutes, the cow can be released and the hoof can be submitted to stress. Keep the mixing tip on the cartridge after application.
Adhesive inside the tip will harden and will seal off the cartridge. A new mixing tip must be used for the next application.
Reseal the cartridge with cap if no application is needed for longer period of time.
What others are saying
There are no contributions yet.